30
3 Operating
3.
Operate the pedal switch (Fig. 13/1) to release the
brushing foot. You can now move the handle
backwards and forwards.
4.
Switch on the brush vacuum cleaner using the on/off
switch (Fig. 14/1).
5.
To vacuum, push the brush vacuum cleaner back and
forth. When vacuuming, observe the corresponding
recommendations of the flooring manufacturer.
3.2
Switching off and
winding up the power
cable
1.
Switch off the brush vacuum cleaner using the on/off
switch (Fig. 14/1) and pull the plug out of the socket.
2.
If necessary, push the telescopic tube (Fig. 15/1) into
the telescopic tube mount (Fig. 15/2), until it audibly
clicks into place.
3.
Put the appliance into idle running mode. To do this,
move the handle (Fig. 15/1) forwards until it audibly
clicks into place and turn the control switch for setting
the pile depth entirely to the right (Fig. 11/2).
4.
Secure the flexible suction hose to the suction hose
mounts (Fig. 8/1).
5.
Wind the mains cable onto the cable mounts (Fig. 16/1).
6.
Turn the pile depth adjustment entirely to the right
(Fig. 14/2).
NOTE:
The brushing roller on your Vision V1 brushes the dirt out
of the carpet and therefore cleans your carpet flooring
particularly thoroughly. Set the pile depth adjustment
according to your type of flooring to achieve an optimum
cleaning result.
Fig.13
1
Quick
lite
Fig.14
1
Fig.15
1
2
3
Fig.16
1
02 Vision V1_de.book_gb.book Seite 30 Freitag, 4. Mai 2007 11:51 11
