34
5 Maintenance
4.4
Clean the protective
motor filter and the
blow-out filter
1.
Remove the protective motor filter (
Z
Chapter 4.2,
"Replacing the protective motor filter"
,
Point 1-3
) and/or
the blow-out filter (
Z
Chapter 4.3, "Replacing the blow-
out filter"
,
Point 1-4
).
2.
Rinse the filter with lukewarm water (max. 40° C). Then
allow it to dry for 24 hours.
5
Maintenance
5.1
Changing the V-belt
1.
Place the appliance headfirst on an even surface.
2.
Unscrew the 4 screws on the hinge covers (Fig. 25/1) of
the base plate (Fig. 25/2) using a crosshead
screwdriver.
3.
Remove the hinge covers (Fig. 25/1).
4.
Pull the base plate (Fig. 26/1) carefully up out of the
appliance.
5.
Unscrew the 5 fastening screws (Fig. 27/1) on the
upper brushing foot cover (Fig. 28/1).
6.
Turn the appliance around.
ATTENTION:
The filters are not suitable for the dishwasher. Do not dry
the filter with a hairdryer. Never use the brush vacuum
cleaner without filters.
WARNING:
Turn the appliance off and pull out the mains plug before
starting to replace the V-belt. Otherwise there is a risk of
injury.
Fig.25
2
1
Fig.26
1
Fig.27
1
02 Vision V1_de.book_gb.book Seite 34 Freitag, 4. Mai 2007 11:51 11
