TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
Pull cleaning wand to the
front of the cleaner and
press hose into handle
assembly.
Insert excess cord into handle
of the cleaner by pushing
down into lower handle.
CAUTION:
AVOID PINCHING
CORD WHILE INSERTING
INTO HANDLE.
Remove the 4 screws from the label on the back of the
handle. Align handle onto base of cleaner (Diagram 3).
Using a Phillips or Flathead screwdriver, secure the handle
by inserting the provided four screws into the back of the
handle (Diagram 3a).
WARNING:
Failure to use all 4 screws for handle assembly
could cause the handle to break.
Use carry handle located on dirt container
lid.
NOTE:
Do not carry vacuum cleaner by
the cleaning wand tube. This is not a
carry handle.
Connect the cleaning wand to
the opening on the base and
push the wand handle towards
unit until it snaps into place.
TRANSPORTING YOUR CLEANER
Attach the Power Brush tool to the tool caddy by
snapping into place (Diagram 4). Attach the dust
brush by pushing onto post on back of cleaner
(Diagram 4a).
1.
2.
3.
3a.
4.
4a.
5.
1.
ASSEMBLY
6
Summary of Contents for M130000
Page 46: ...www dirtdevil com ...
