28-0014 GSM REMOTE CAMERA USER MANUAL
23
No.
General Trouble
Possible Reason
Solution
flashed in red color
and can not turn to
green.
try again.
SIM card PIN code actives.
Close the PIN code.
SIM card invalid.
Contact with local operator to
check of it.
6
Remote control can’t
work. Or action slowly.
Or control distance
range shortened.
Camera low power.
Connect external power to
recharge the battery.
Remote control low power.
Change remote control
battery.
Two remote controls work
simultaneously.
Try only one remote control.
7
Can’t add new remote
control or wirele ss
sensor
The remote control or sen
sor
already studies successfully.
Exit the loading status.
The sensor quantity is alre
ady
reaches its max number.
Delete old sensors before add
new sensor.
Didn’t set master user number
Set master number before
add sensor.
8
Can’t start the camera
after long time supply
with the battery.
Battery runs out of power.
Connect the camera to
external AC power and charge
for at least one ho ur, then,
restart camera.
Note
: If the problem can’t be solved with above guidelines, cont act to your loc al
distributor or after service center.
Chapter 6 Main technical parameters
Power adaptor Input:
100V
～
240V/50Hz Output: 5.5V DC
Operating temperature -10
℃
～
+45
℃
Store temperature -20
℃
～
+60
℃
Relative humidity 10-90%
，
without condensation
Working band
EGSM900,DCS1800 (GSM850,PCS1900 Optional)
Communication protocols GS
M PHASE 2/2+ (including data operation)
Wireless sensor receiving code ASK
Wireless sensor receiving band 433MHz
Max. wireless sensors 15 units
Remote control receiving band 433MHz
Effective distant of the remote control 6 meters (wide area)
Image format JPEG
Image resolution 160
×
128,QVGA320
×
240,VGA640
×
480
