28-0014 GSM REMOTE CAMERA USER MANUAL
18
ArmTime
,
DisarmTime
.
•
ArmTime and DisarmTime
: Be
consists of 4 digit s (hh:mm) and works on a
24 hour clock. For example: 0000 m eans time 00:00(hh:mm), 2359 mean s
time 23:59(hh:mm). The ArmTime and DisarmTime should be in the same day,
and the DisarmTime must be later than ArmTime during the same period.
4.4 Emergency alarms
The user press the remote control emergency button
to make TUTA camera
alarm. TUTA camera will stop any other operation once it receive emergency alarm
signal, and start emergency alarm process. TUTA camera will dial the
Master
number
not more than 3 times until someone answers. If, after 3 attempts, there is no answer,
TUTA camera will automatically stop dialing and revert to its preset mode.
Master
can
listen in the live audio by answering the call. (Refer remote control instruction parts.)
4.5 Remote control
4.5.1 Pairing remote control
Normally the remote control was paired in factory. if the remote camera can not work
with TUTA camera, user should pair the remote control separately. A camera can pair
up to 5 remote controls.
Camera indicator
Operations
Status
Green, flashing or
constantly light.
1. Press and hold the
Set
key
for 2 seconds
Indicator light turns to orange
(Learning mode)
Orange, flashing
2. Press any button o n the
remote control (with battery
inside) to send a signal to
TUTA.
TUTA will emit a “Beep” tone
and indicator will turn green for
2S. (Added successfully.)
Orange, flashing
3. Repeat step2 to
load
another new remote control.
Orange, flashing
4. Press th e
Set
key to ex it
the learning mode or waiting
for 15 seconds to auto-exit.
Indicator light turns green,
flashing or constantly light. (Exit
learning mode)
4.5.2 Remote control instruction
There are three buttons on the remote control:
