15
Operating Instruction
7.6.1. RS-232 Baud Rate setting
It has 4 kinds of baud rates inside the device:
38400,19200,57600,115200
Default Baud Rate is: 115200
①Select“Setup”in the menu and press“ENTER”
②Then use “UP””DOWN”button to select the “BAUD”and press “ENTER”
③Press “UP””DOWN”button to select the baud rate and press “ENTER”to confirm
7.6.2. DHCP On/Off setting
On means Dynamic; Off means Static
①Select“Setup”in the menu and press“ENTER”
②Then use “UP””DOWN”button to select the “DHCP”and press “ENTER”
③Press “UP””DOWN”button to select“On”or“Off”and press “ENTER”to confirm
7.6.3. POC power switch
The POC interface can select a certain UTP (Remote side) output switch to control POC power
supply, and the default POC is "On"
