22
Operating Instruction
Please refer to the " Command list" for details.
Example: ALL output switches to input 4.
Operation format: #video_d out0 matrix=4
12. Web Control
1). Connect the Ethernet port of matrix to the Ethernet port on PC by a crossover cable with RJ45
connectors.
2). Configure your PC as follows:
1
Click
Start
>
Control Panel
>
Network and Sharing Center.
2
Click
Change Adapter Settings
.
3
Highlight the network adapter you want to use to connect to the device and click
Change settings of this connection
.
3). The local Area commotion properties window for Network selection appears as below:
4). Click the Highlight
Internet Protocol Version 4 (TCP/IPv4)
.
5). Click
Properties
.
6). Select
Use the following IP Address
for static IP addressing and fill in the details.
For TCP/IP
v4
you can use any IP address in the range 192.168.1.1 to 192.168.1.255 (excluding
192.168.1.168).
7). Click
OK
.
8). Click
Close
.
Default IPAddress: 192.168.1.168
MASK: 255.255.255.0
Gateway:192.168.1.1
MAC:0008-DCCA-CF3F
