DirecTV H23, User Manual

Page: 47 / 98

40
Blank screen
Check that all components connected to the input jacks are turned on.
Try another channel.
Your DIRECTV HD Receiver may be hooked up incorrectly to the TV. Press the INFO button on the front
panel of the DIRECTV HD Receiver to see if the channel banner appears. If it does not, check the Setup and
Connections section for instructions about connecting your satellite receiver.
Press the TV INPUT key on the remote to make sure your TV input is set to the TV input your DIRECTV HD
Receiver is connected to.
Press the POWER button on the front of the DIRECTV HD Receiver.
Press the RESET button behind the door on the front panel of the DIRECTV HD Receiver.
Temporary loss of the satellite signal or Searching for Satellite Signal message
Your satellite system may be experiencing rain fade , a temporary loss of the satellite signal due to unusually heavy
rain clouds or rainfall. Rain fade is usually brief, lasting only as long as the heavy rain cloud condition persists.
Your dish may be blocked. Check that something is not blocking the dish.
If you live in
a newly built
neighborhood,
be sure to
place your
dish where
it is unlikely
to become
blocked by a
fast-growing
tree.
H22 User Guide.indb 40 H22 User Guide.indb 40 2/14/08 2:32:03 PM 2/14/08 2:32:03 PM