page 33 of 40
MADI.MONI Manual - Version 1.1
CHAPTER 4: Operation
Calibration BNC I/O
The input of the coaxial BNC port shall be calibrated at periodic intervals to assure
accuracy of the measuring.
Procedure:
• Connect a loop from BNC input to BNC output
• Press and hold VOL/CH and MENU buttons for 5 seconds until ‘C1’ is
displayed.
During the calibration process ‘C2’, ‘C3’ and ‘C4’ will be displayed. When the
calibration is done the device returns to normal operation mode.
Display
Progress of calibration
calibration process is initiated
calibration phase 2
calibration phase 3
calibration done
NOTE
If the display stays at ‘C1’ check the cabling.
