DirectOut Technologies
®
page 43 of 56
D.O.TEC
®
ANDIAMO.AES (SRC) Hardware Guide - Version 1.0
CHAPTER 5: Menu Navigation
© 2013 DirectOut GmbH
Parameter <Sample Rate>
Two base sample rates: 44.1 kHz and 48 kHz
Two scaling factors: 1 FS and 2 FS
The setting of the base sample rate only affects the conversion with
the clock source set to INT. If the clock source is set to AES input or
word clock or MADI input no adjustment is possible - the measured
frequency of the clock source is indicated then.
Parameter <Clock Source>
Four different clock sources: AES, Word clock, MADI, internal
Internal allows for changing the base sample rate.
Parameter <MADI Out Format>
The channel format (56 ch or 64 ch) as well as the frame format
(48k Frame or 96k Frame) of the MADI output can be adjusted.
This setting does not affect the input signal.
In menu mode the active parameter for adjusting is indicated by a
blinking LED. This LED refl ects the setting of this parameter.
Parameter <User Bit Routing>
The processing of user bits or channel status data can be adjusted
for the output signal.
Three settings: OFF, REM, CUVP
System Settings
