9
© 2012 Directed. All rights reserved.
•
The ignition is turned off.
•
The control center button is pressed too many times.
•
More than 15 seconds elapses between steps.
Transmitter configurations
The transmitters are programmed with the standard configuration by using the Auto Learn functions in the Transmitter/Receiver Learn Routine. For
more information about the remote control functions, see the Owners Guide.
System features learn routine
The System Features Learn Routine dictates how the unit operates. It is possible to access and change any of the feature settings using the control
center button. However, this process can be simplified by using the Bitwriter®. Any of the settings can be changed and then assigned to one of
four remote controls. This feature is called Owner Recognition. Each time that particular remote control is used to disarm the system, the assigned
feature settings will be recalled. Owner Recognition is only possible when programming the unit via the Bitwriter®.
If programming with the Bitwriter®, the learn routine can be locked or unlocked. If the learn routine has previously been locked, it must
be unlocked with Bitwriter® - this cannot be done manually with the control center button .
1. Open a door.
2. Ignition. Turn the ignition on, and then off.
3. Select menu. Press and hold the Control center button. the number of siren chirps indicates the menu number. 1 chirp indicates menu 1,
2 chirps-menu 2 and 3 chirps for menu 3. when the desired menu chirps are heard, release the control button.
4. Select a feature. press and release the control center button the number of times corresponding to the feature you wish to change. then
press and hold one more time to select the feature..
5. Transmit. The transmitter is used to select the desired setting. Pressing
changes the feature to the one chirp setting. Pressing
changes the setting to the two chirp setting. For features with more than two options:
selects the options in ascending order.
6. Release, the control center button.
Once a feature is programmed:
•
Other features can be programmed within the same menu.
•
Another menu can be selected.
•
The learn routine can be exited if programming is complete.
To access another feature in the same menu:
1. Press and release the control button the number of times necessary to advance from the feature you just programmed to the next one you
want to program.
2. Then press the control button once more and hold it.
To select another menu:
1. Press and hold the control button.
2. After 3 seconds, the unit advances to the next menu and the siren chirps, indicating which menu has been accessed.
The learn routine is exited when:
•
The door is closed.
•
The ignition is turned on.
•
The Control center button is pressed too many times.
•
More than 20 seconds elapses between programming steps.
One long siren chirp indicates that the Learn routine has been exited.
