10
© 2012 Directed. All rights reserved.
Feature menus and descriptions
The default settings are indicated in bold type. The number in parentheses indicates the number of times the siren chirps
Menu 1 - Basic
M e n u
Item
One-chirp setting
Two-chirp setting
1
Active Arming
Passive arming
2
Arm/disarm chirps on
Arm/disarm chirps Off
3
Ignition lock On
Ignition lock Off
4
Ignition unlock On
Ignition unlock Off
5
Active locking only
Passive locking
6
Panic with ignition On
No panic with ignition On
7
0.8 second door lock pulses (1)
3.5 (2), 0.4 (3) seconds
8
Forced passive arming on
Forced passive arming off
9
Automatic engine disable on
Automatic engine disable off
10
Armed When Driving (AWD) On
AWD Off
11
Code Hopping On
Code Hopping off
12
Horn Output Pulsed
Constant
13
Horn function Full Alarm Only (1)
Siren function - chirp length
20mS (2), 30mS (3), 40mS (4), 50mS (5)
14
Comfort Closure ON (1)
Comfort Closure OFF
(2)
Comfort Closure 2 (3)
The features of the system are described below. Features that have additional settings when programming with the Bitwriter® only, are indi-
cated by the following icon:
Menu 1 - Descriptions
1. System Arming mode
1. Active:
the transmitter must be used to arm the system
2. Passive Arm: after exiting the vehicle the system will automatically arm.
2. Arm/Disarm chirps
1.
On:
arm, disarm chirps are active
2. Off : arm, disarm chirps are defeated.
3. Ignition Lock
1.
Off:
the door lock output will not output when ignition is turned off.
2. On: The door lock output will activate when the ignition is turned o
n
4. Ignition Unlock
1. Off:
the door unlock output will not output when ignition is turned on.
2. On: The door unlock output will activate when the ignition is turned on.
5. Active
/Passive
Locking:
If passive arming is selected in Feature 1-1, then the system can be programmed to either lock the doors when passive arming occurs, or only
lock the doors when the system is armed via the transmitter.
1. Active locking
: The system will not lock the doors when it passively arms.
2. Passive locking: The system will lock the doors when it passively arms.
Note:
Remember, when passive arming is selected, the unit will chirp 20 seconds after the last door is closed. The system does not actually arm
or lock the doors until 30 seconds after the door has been closed.
