11
8.2 INSTALLING THE REAR CAMERA
1.
OPTIONAL:
Select the electrostatic film from the box and install it on the rear
windscreen in the recommended position as shown on page 12. Please wipe the glass
before installation and push out any bubbles between the static film and the glass
before installation.
2. Remove the protective film from the rear Camera base bracket and select either the
top or the bottom of the rear window to position the rear Camera. Press down on the
base of the bracket by hand for 30 seconds to ensure that the sticker adhesive has
attached to the electrostatic film.
3. Connect the rear Camera to the front Dash Camera using the cable provided. Either
run the cable through the roof lining or under the carpet underlay as shown on
page 12. The rear Camera can rotate 360° depending on the position and type of
installation method.
Method 1:
Thread the rear Camera cable along the top of the roof lining and connect
it to the Dash Camera.
Method 2:
Lift up the car carpet and run the rear Camera cable along the underlay
of the carpet and connect it to the front Dash Camera.
4. Adjust the rear Camera by rotating the barrel until it is capturing the entire road.
NOTE:
While viewing your live footage on the Dash Camera, the rear Camera will show the true rear
view image where the licence plates of vehicles behind your vehicle will be inverted. Actual
recorded images are horizontally flipped to capture the licence plate correctly.
