10
8.0
INSTALLATION INSTRUCTIONS
8.1 NCP-DVR3CH INSTALLATION
1.
OPTIONAL:
The electrostatic film helps for easy removal
of the Dash Camera from the windscreen and is included
in package contents. Select the electrostatic film from
the box and install it on the front windscreen in the
recommended position as shown. Please wipe the glass
before installation and push out any bubbles between the
static film and the glass before installation.
2. Remove the protective film from the NCP-DVR3CH mounting bracket and position
the Dash Camera in the middle of the electrostatic film (optional). Press down on the
base of the bracket by hand for 30 seconds to ensure that the adhesive is attached to
the electrostatic film. Adjust the camera until its lens is capturing the entire road.
3. Run the Dash Camera charging cable along the top of the front windscreen through
the A pillar and around and under the storage compartment of the passenger seat to
the car's 12/24V adaptor port. Connect the 12/24V adaptor to the car power.
* If not using DMS function
* If using DMS function
