Directed Digital System MIT4
© 2015 Directed. All rights reserved.
Quick Reference Guide – Viper, Clifford, Python, Avital & Automate (Regular Key)
Vehicle takeover with regular key
1
Close the vehicle doors, hood and trunk, then
press the
Remote Start
button on the transmitter
to start the vehicle.*
Press Remote
Start button*
2
Press the
Unlock
button on the factory or
aftermarket remote. *
Press Unlock on
either remote*
PANIC
OR
Complete the following steps within 45 seconds or the vehicle will shut
down.
3
Enter the vehicle and turn the key into ON
position.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
4
Depress the brake pedal, put the car in gear
and drive off.
Ready to
drive off
* Your aftermarket remote may differ from the model shown in the illustrations.
Manual transmission ready mode
1
While the vehicle is running, put the gear in
Neutral
(N).
Put
gear in
Neutral
2
Depress the vehicle’s foot brake.
Depress
brake
pedal
3
Apply the emergency brake.
Apply
emergency
brake
4
Release the vehicle’s foot brake.
Warning!
Depressing the brake pedal again after this
step will disable the remote start feature.
Release
brake
pedal
5
Press any button on the transmitter.* The parking
lights flash 5 times confirming that the remote start
feature is active.
Note
: If the parking lights do not flash 5 times, you
have not entered manual transmission mode and will
need to repeat steps 1 to 5.
Parking lights flash x5
Press any
button*
&
6
Turn ignition OFF and remove the key from the
ignition barrel.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
7
Exit the vehicle.
Exit vehicle
8
Press the
Lock
button on the factory or aftermarket
remote.*
The vehicle engine will shut Off after locking
the system.
Press Lock on
either remote*
PANIC
OR
* Your aftermarket remote may differ from the model shown in the illustrations.
