7
403.NISS3HT 3.09 2009 Nissan Altima (Smart Key)
© 2020-08-12 Directed. All rights reserved.
Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).
3
2
1
30
85
87a
86 87
30
85
87a
86 87
D2D Port
Wiring diagram
with
T-Harness (THNISS3/THNISS3D)
with
manual transmission
14
12
10
4
2
Do not
connect
THNISS3/THNISS3D
(optional T-Harness)
D2D
only
Diagnostic Connector
OBDII
The Remote Start Safety
Override Switch is
inactive (used for RSR only)
NOT USED
(-) RAP Off Output:
Red/Black
(-) Push-To-Start Output:
Green/Black
(+) Ignition Status Output:
Violet/Brown
(+) Ignition Status Input:
Violet/Green
NOT USED
T-01
T-01
T-02
T-02
B-01
OR
B-02
Clock & Data Wire
at Key Port Connector
Refer to the
Vehicle wiring
reference charts
for wire
location.
NOT USED
Clutch Pedal 1
1
1
2
2
Clutch
Pedal
CUT
Clutch Bypass,
pin2
Clutch Pedal 2
Clutch Bypass,
pin1
(+) Starter Output
(-) Ground
(+) Ignition Input
Clutch
Bypass,
pin2
(AC) Tach Output:
Violet/White
(AC) Tach Input
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2
40
39
38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21
1
1
4
5 6 7 8
3
2
Push-to-Start
(Brown conn. at Push-to-Start switch)
(-) Push-to-Start:
Brown
, pin 4
Connectors T-01 and T-02
(each pair has one male and
one female) are not interchangeable,
thus you will be able to connect
ONLY the correct connectors.
BCM conn.
(Green connector behind instrument cluster)
Note:
insert pin if wire is not present
(-) Driver Door Trigger:
Lt.Blue,
pin 39
(+) 12V Input
(+)12V:
White or
White/Black,
pin 1
BCM conn.
(Black connector
behind instrument cluster)