Directed Directechs DB3 Installation Manual Download Page 5 | Manualshive

Page: 5 / 22

Directed Directechs DB3 Installation Manual Download Page 5

5

403.NISS3HT 3.09 2009 Nissan Altima (Smart Key)
© 2020-08-12 Directed. All rights reserved.

Pre-installation and application warnings

Firmware notes:

This section highlights important information for this specific firmware and will assist in

pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.

T-Harness

compatible

THNISS3/THNISS3D

Keys required for

programming

1

Keys required for

operation

0

The optional Plug & Play

THNISS3/THNISS3D

T-Harnesses are sold separately.

The OBDII Diagnostic Connector features will remain the same even when the T-Harness is installed.

Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic
connector.

Refer to "Vehicle connections" following the wiring diagram.

General notes:

This section highlights important information for this specific firmware.

[1]

Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.

[2]

This connection is

ONLY

required if the feature does not operate in data.

«
...
3
4
5
6
7
...
»

Summary of Contents for Directechs DB3























Reviews:

No comments