Directed 933.MIT3 Installation Manual Download Page 23

23

933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution
©2022 VOXX•DEI LLC.  All rights reserved.

SmartStart Bluetooth compatiblity (applicable to DS4/DS4+ ONLY)

This system is equipped with a Bluetooth version of SmartStart offering up to 200' of range. 
The simple graphical interface gives you control over the following features of your installed 
remote start system or security with remote start system:
This system is compatible with Directed SmartStart. For a complete list of supported features, 
please visit www.mysmartstart.com.

What is SmartStart?

Now you can remote start, lock and unlock your car just by pushing a button on your 
mobile device; using the SmartStart App from Directed, the leader in vehicle security and 
remote start. The simple graphical interface gives you control over the following features of 
your installed remote start or security with remote start system: 
Lock/Arm
•  Unlock/Disarm
•  Remote Car Starter
•  Trunk Release
•  Panic
•  AUX Channels

You can also control multiple vehicles – great for families – and assign more than one user 
to control a vehicle. It’s easy with SmartStart! But, this is only the beginning! SmartStart 
is loaded with additional features including GPS tracking, SmartSchedule, vehicle status, 
roadside assistance, parked car finder and more.

The application enables a “Cloud-Connected Car” like never before, providing 2-way 
interaction with your vehicle. Connectivity is managed through the Directed Cloud Services 
(DCS) network linking car, app, end user, and the Internet.

For more information, visit www.mysmartstart.com.

Notes

Summary of Contents for 933.MIT3
























Reviews: