Directed Electronics 1090, Owner'S Manual

Page: 38 / 60

© 2006 directed electronics—all rights reserved
“
remote
” The remote control Notification will be two beeps
ascending in tone followed by the remote start animation.
turbo mode remote start
To activate Turbo mode
a. Park the vehicle and set the parking brake
b. Leave the engine running and remove your foot from the
brake pedal.
c. Press and release the and
�������
buttons together.
d. The lights will flash or turn on to confirm the remote start
has taken control of the engine.
e. Remove the key. The engine will continue to run.
f. Exit and secure the vehicle.
g. The engine will turn off when the programmed Turbo mode
run time expires.
“
remote
” The remote control Notification will be two beeps
ascending in tone followed by the remote start animation.
timer mode remote start
To activate timer mode
a. Press and release the
�������
and
�������
buttons of the remote
control once.
b. The lights will flash four times as confirmation the Timer
mode command was received.
c. The system will send a remote start response to the remote
control.
d. A few seconds later the engine will start. For diesel vehicles