Directed Electronics 1090 Owner'S Manual Download

Page: 51 / 60

➜

page mode on/off

When Page is off, the remote control will not receive Pages or output
Page Notifications or Alerts. It will only receive Command Reponses.

1.  Enter programming mode
2.  Scroll to highlight OPERATION
3.   Press

to choose the operation menu screen

4. Scroll to highlight PAGE and press

to choose.

5. Scroll to highlight the desired setting.
6. Press

to save and return to the Operation menu or

��

to save the setting and exit.

➜

beeps on/off

When Beep is off, the remote control will only show animations or
icons for Page Notifications.

1.  Enter programming mode
2.  Scroll to highlight OPERATION
3.  Press the

button to choose the operation menu screen

4. Scroll to highlight BEEP and press

to choose.

5. Scroll to highlight the desired setting.
6. Press

to save and return to the Operation menu or

��

to save the setting and exit

Summary of Contents for 1090



























































Search results

Summary of Contents for 1090

Reviews:

Related manuals for 1090

Brands by name

Popular brands

Directed Electronics 1090, Owner'S Manual

Search results

Summary of Contents for 1090

Reviews:

Related manuals for 1090

Brands by name

Popular brands