6
5. Mount the assist device mounting plate to your bed using the
provided bolts, nuts and washers.
• Correct order of hardware: Bolt
➔
Assist Device
➔
Bed Deck
➔
Flat Washer
➔
Nut
• Using a 19 mm combination wrench or socket wrench and an
8 mm Allen wrench, securely tighten both sets of hardware
•
WARNING:
Only use the included hardware to attach this
assist device to a bed. Do not substitute hardware. Safe
installation requires use of all provided attachment hardware.
Installation
(cont.)
6.
To prevent rapid height adjustment or removal of the assist,
use the included nut and bolt to secure the assist handle to
the support tube.
Insert the assist handle into
the support tube on the assist
device mounting plate.
For quick-release adjustment
of handle height and quick
removal of the assist handle,
use the included retention pin.
Position the assist at the
desired height setting and
then secure the assist with the
included retention hardware.
