Part 1 - Remote Setup
19
•
Switching Level:
Sets up the switching level between
daytime and nighttime modes. For example, if the
darkness level is set to
3
and th
e
brightness level to
5
, t
h
e system switches to nighttime mode when in
lighting conditions of level 3 or below and to daytime
mode when in lighting conditions of level 5 or over. It
is recommended that you do not set up the darkness
level and brightness level identically; otherwise, this
function may not work properly. This functions only
when
B&W Mode
o
r IR Cut Filter
is set to
Auto
.
Miscellaneous
Configure
Miscellaneous
settings.
•
Smart IR:
Prevent the object from being saturated by
IR light. Select
Auto
to control saturation only when
the zone is over-saturated.
