www.dipol.biz
6
6. Setting-up procedures and performance inspection
Unscrew the battery cap (12) and insert power elements according to
the polarity, indicated on the body or unscrew USB slot cap (11) or outer
power source slot cap (16) and switch outer power supply to the slot.
Put off the cap from the objective (2). Please pay attention when using
accumulator batteries as power supply charge indicator will display blue
with letter «А».
Press ON/OFF (1) button wait till image appears in the eyepiece. Time
of device switch doesn’t exceed 5-7 seconds. On the download screen
you will see the logo of company-producer, language and software after
that the device will proceed to operating mode. Whole image on the
screen in operating mode can be observed at pic. 2
Рiс.2
With the help of diopter adjustment ring (5) reach maximal sharpness
of an image. Follow the inscriptions and icons on the display.
After that direct the device to the chosen object and reach sharp image
of the observed object by rotating focusing handle (3) of the objective.
If on-indicator (6) doesn’t light or is blinking after switching, and
there is no image of charge indicator/switched outer power supply in the
eyepiece or it is blinking, may be, power elements or outer power supply
are uncharged. You need to change power elements or external power
supply.
zoom
image polarity
gain, brightness,
sensitivity, IDE
profile
power indicator
Summary of Contents for D1000R
Page 19: ...www dipol biz 19 Notes...
