Dipol D1000R, Manual

Page: 11 / 20

www.dipol.biz
11
For to watch video online, you may use any player with RTSP video
available (for example, VLC player). You should install playback from the
following address rtsp://192.168.0.110 Playback starts after pressing
REC button (in the status line record timer and WiFi icon appear).
Video recording mode
In this part you may choose modes of video record/ broadcast of
video:
Normal start
or
Quick start
.
In Normal start mode video record/ broadcast of video starts a bit after
pressing REС button, it is needed to switch on corresponding module and
software download (up to 10 sec).
In Quick start modules are activated during the device is switched on
and record/broadcast of video starts more quickly after pressing REC (up
to 5 sec) button, but keeping the modules in active status considerably
increases power consumption.
Signs in status bar during video recording process:
REC (blinking) - recording module turns on
REC 00:00:00 - recording module ready for record
REC 00:01:20 - recording process
REC Saving - data saving on internal SD-card
Pressing and holding for several seconds REC button allows to switch
off video module and to lower power consumption, but after that it takes
some time for the device to start video record /broadcast – as it happens
with Normal start mode.
Date and time stamp position
It allows to indicate date position and video recording time into the
built-in memory card (it is not displayed).
Super contrast display mode
Allows to install higher level of contrast of microdisplay.
Proximity sensor
Activates function of microdisplay switching off when it is away from
the user’s eye to save power or to avoid demask.
Proximity sensor range, mm
Allows to install the distance when function of microdisplay auto
switching is activated.