www.dipol.biz
12
Auto bad pixel correction
Start of the mode for defected pixels autocorrection.
Pay your attention that device objective must be closed by the cap
during the process. After the process press and hold MENU (4) handle to
save changes or shortly press MENU handle to cancel changes.
Bad pixel correction
This mode allows to remove isolated defected pixels or group of them
manually. Please pay attention that correction of the group of defected
pixels should be fulfilled from the edges to the center by narrowing the
radius step by step.
Rotation of MENU handle allows to change cursor position (during
constant rotation the pitch of cursor shift increases), short pressing of
the handle allows to change coordinate axis. After the cursor stands
together with the defected pixel shortly press ZOOM button after that
defected pixel changes its color.
If necessary, repeat the procedure with other defected pixels. To save
the changes press and hold for a long time MENU handle.
LRF reading position
In this part you may choose position of object distance displayed by
range finder.
Status bar position
Allows to choose position of status line on the screen of the device.
Status bar delay time,s
In this part you may choose time (in seconds) of control inactivity
when status line disappears from the display.
Menu position
Allows to choose position of menu on the screen.
OSD transparency
In this part you may choose level of interface transparency to lower
“burning” of microdisplay with static image.
Auto power off, minutes
Allows automatically turns off the device after selected time of
inactivity.
Language
Allows to choose interface language. Russian, English, Deutch, Spanish
are available.
Summary of Contents for D1000R
Page 19: ...www dipol biz 19 Notes...
