Dionex UltiMate 3000, System Installation And Application

Page: 7 / 73

UltiMate 3000 Nano and Cap - System Installation and Application
3
Important: Afin d'empêcher l'instrument de tomber, saisissez-la par les côtés. Ne
soulevez l'instrument à l’aide du matériau d'emballage ou par la porte
du panneau avant.
•
Remove the foam inserts.
•
Check off the contents of the accessories kit pack against the accessories list.
Important: To prevent damage to the instrument when lifting or moving, always hold
it by the bottom or sides.
Important: Afin d'éviter d'endommager l'instrument lorsque que vous le soulevez ou
le déplacez, saisissez-la toujours par le bas ou les côtés de l'unité.
1.4 Supported System Configurations
For an overview of the currently available system modules, refer to the table below. If you
have any questions, do not hesitate to contact your Dionex sales representative or distributor.
Please note: For more information about the configuration of the individual modules,
refer to the related
Operating Instructions .
Application UltiMate 3000 System Module Part No.
SRD-3600—Solvent rack with 6-channel vacuum degasser
(intended, e.g., for use with a DGP-3600)
—
or —
SR-3000—Solvent rack for secure positioning of solvent bottles (without
degasser, intended, e.g., for use with an LPG-3400)
5035.9230
5035.9245
DGP-3600—Ternary dual low-pressure micro gradient pump
(with loading pump and micro pump in one enclosure)
Standard pump (DGP-3600M)
Biocompatible pump (DGP-3600MB)
—
or —
LPG-3400—Quaternary low-pressure micro gradient pump
Standard pump (LPG-3400M)
Biocompatible pump (LPG-3400MB)
5035.0050
5037.0060
5035.0045
5037.0055