5 OF 8
IG022719-1.0
HYDROLUME
®
SLIM 24V LED STRIP LIGHT
INSTALLATION GUIDE
HYDROLUME
®
SLIM 24V LED Strip Light
INSTALLATION GUIDE
INSTALLATION (CONT.)
INSTALLATION: UL LISTED 2108 MODELS
FOR APPLICATIONS THAT ARE NOT UNDERWATER
2
DETERMINE LOCATION TO INSTALL
COMPONENTS
AC IN
DC OUT
L
G
N
V
−
V+
+
−
1) Class 2 Driver
2) Control
3) Hydrolume
Refer to
SYSTEM DIAGRAMS
WIRE GAUGE & VOLTAGE DROP
Ensure applicable wire is installed between driver, fixture, and any
controls in between. When choosing wire, factor in voltage drop,
amperage rating, and type (in-wall rated, wet location rated, etc.)
3
MOUNT HYDROLUME TO SURFACE.
See mounting options a, b & c.
Mark placement for HYDROLUME Mounting Brackets -- roughly
12 inches apart. Fasten brackets with M2.9 (#4) screw or similar
size (not provided). Once mounted, fasten HYDROLUME to
brackets.
a
HYDROLUME Mounting Brackets
1
TURN POWER OFF AT CIRCUIT BREAKER
SHOCK HAZARD!
May result in serious injury or death.
Turn power OFF at circuit breaker prior to installation.
Slide bracket into stake at desired angle to position HYDROLUME
strip. Press stakes into ground roughly 12 - 16 inches apart. Once
stakes are planted into ground, firmly press HYDROLUME strip light
into brackets.
b
C
Install Garden Stake
B
A
31-41cm
12”-16”
C
Install Garden Stake
B
A
31-41cm
12”-16”
C
Install Garden Stake
B
A
31-41cm
12”-16”
HYDROLUME Stake Brackets
