4 OF 8
IG022719-1.0
HYDROLUME
®
SLIM 24V LED STRIP LIGHT
INSTALLATION GUIDE
HYDROLUME
®
SLIM 24V LED Strip Light
INSTALLATION GUIDE
INSTALLATION (CONT.)
Shift in
brightness
and/or kelvin
• Ensure an appropriate gauge of
wire is installed between strip light
and LED driver.
See VOLTAGE
DROP CHARTS.
Some LEDs
are not
functional
• Ensure strip light has not been bent
excessively, which could damage
circuitry.
• Ensure strip light has not been
submerged in any liquid for any
amount of time.
Lights are
flickering
• Ensure a compatible driver and/or
dimming control is installed. Check
for loose connections.
Lights are
turning on/off
repeatedly
• Ensure driver is not overloaded. An
overloaded driver will trip the internal
auto-reset (of driver) repeatedly,
turning the system on/off.
To Class 2 LED Driver,
GFCI, & Circuit Breaker
To Additonal
HYDROLUME
Pool / Spa
Junction Box
Corrosion
Resistant Conduit
4 in. Min.
48 in. Min.
J-Box to Edge of Pool
8 in. Min.
Bottom of J-box
to Top of Water Line
Seal Conduit Entry with
pool-grade silicone sealant
For concrete pools, seal conduit entry with pool-grade
silicone sealant.
DO NOT drill holes in fiberglass pools/
hot tubs or vinyl-lined pools
. An alternate method is to
route the wire directly out of pool.
4
5
6
ATTACH CONTROL AND DRIVER
Verify a compatible constant voltage driver is installed. Utilize
applicable wiring when installing outdoors.
REVIEW SYSTEM
Ensure all polarities are correct and connections are secured.
TURN POWER ON AT CIRCUIT BREAKER
INSTALLATION: UL LISTED 676 MODELS
FOR UNDERWATER APPLICATIONS
3
CONT.
