Dinstar UC2000-VE, User Manual, Page: 16 / 124

UC2000-VE/F/G GSM/CDMA/WCDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Co., Ltd.
15
2
Quick Installation
2.1
A
TTENTIONS BEFORE
I
NSTALLATION
Please pay attention to the following before you install UC2000-VE/F/G include:

DC power/AC power should be grounded well to ensure reliability and stability

Network interface should be standard RJ45 with 10Mbps or 100Mbps interfaces

GSM channels work properly and antennas should be well connected.
2.2
I
NSTALLATION
P
ROCEDURES

Connect antennas to the device;

Connect the power wire to the device;

Connect network cable to the device;

Insert SIM cards to SIM slots.
2.3
N
ETWORK
C
ONNECTION
Switch/Router
PC
192.168.11.1
FE0
192.168.11.10
Note: UC2000-VE/F/G has two Ethernet ports (namely FE0 and FE1). The device can
work normally when either of the ports is connected to PC. The IP address of device
must be at the same network segment with that of PC.