Dinstar SBC1000, User Manual

Page: 70 / 71

3 Configurations on Web Interface
SBC1000 Session Border Controller
Copyright©2011-2018 Dinstar
64
Log Management
On the Maintenance

Log Management page, you can set the log level to filter logs, and can export the logs of
different level.
Figure 3-53 Log Management
Tools
On the Maintenance

Tools page, you can use three network utilities including Ping, Traceroute and Nslookup
to diagnose the network, and can capture data packages of the available network ports.
[PING]
Ping is used to examine whether a network works normally through sending test packets and calculating response
time.
Instructions for using Ping:
1. Enter the IP address or domain name of a network, a website or a device in the input box of Ping, and then click
Ping .
2. If related messages are received, it means the network works normally; otherwise, the network is not connected
or is connected faultily.
[ Traceroute]
Traceroute is used to determine a route from one IP address to another.
Instruction for using Traceroute:
Step1. Enter the IP address or domain name of a destination device in the input box of Traceroute, and then click
Traceroute .
Step2. View the route information from the returned message.
[Network Capture]
On the following interface, you can capture data packages of the available network ports. You can also set source
IP, source port, destination IP or destination port to capture the packages that you want.