3 Configurations on Web Interface
SBC1000 Session Border Controller
Copyright©2011-2018 Dinstar
33
SIP
The SIP headers that are passed through.
A SIP header in a row, case-sensitive, without any extra punctuation marks
Note:
1.The ‘Allow’ and ‘Supported’ SIP headers can only be passed through during registration. That is to say, they
cannot be passed through during calling. Please think carefully before passing through these two SIP headers, as
they might conflict with the configurations of SBC1000.
2.The following SIP heads are not allowed to be passed through:
Network, To, From, Contact, Cseq, Max-Forwards, Content-Length, Content-Type, Via, Require, Proxy-Require,
Unsupported, Authorization, Proxy-Authorization, Www-Authenticate, Proxy-Authenticate, Accept, Route,
Record-Route, Refer-To, Referred-By, Auto-Defined
。
Access Network
On the
Service
Access Network
page, you can configure the parameters of access network, which will be used
when terminal users are registered to softswitch through the SBC1000 device.
Summary of Contents for SBC1000
Page 3: ......
