Dinstar SBC1000 User Manual Download Page 54

Page: 54 / 71

3 Configurations on Web Interface

SBC1000 Session Border Controller

Caller Username

The caller number set for matching the route, which supports regular expression. If the

caller number of a call matches with this number, the call will be routed by the route. If

this parameter is null, it means caller number can be any number.

Callee

Username

The callee number set for matching the route, which supports regular expression. If the

callee number of a call matches with this number, the call will be routed by the route. If

this parameter is null, it means callee number can be any number.

ime Profile

The profile of time during which the route can be used; If this parameter is null, it means

the route can be used at anytime.

Please make reference to 3.4.4

Caller SIP URL

If the ‘SIP URL’ field of the ‘FROM’ header of a request message sent by a caller number

matches with the value configured here, the call will be routed by the route.

If this parameter is null, it means the SIP URL from caller can be any.

SIP URL

If the ‘SIP URL’ field of the ‘FROM’ header of a request message sent by a callee number

matches with the value configured here, the call will be routed by the route.

If this parameter is null, it means the SIP URL from callee can be any.

Source Type

The source of the call routed by the route. If the source of a call is access network or

access SIP trunk, the destination can only be core SIP trunk; If the source of a call is core

SIP trunk, the destination can be access network or access SIP trunk.

SIP Methods

The SIP method(s) supported by the route. If this parameter is null, it means SIP methods

can be any.

Destination

Type

The destination of the call routed by the route. If the destination of a call is access

network or access SIP trunk, the source can only be core SIP trunk; If the destination of

a call is core SIP trunk, the source can be access network or access SIP trunk.

Destination

The specific SIP truck where a call will be routed

Number

Manipulation

If it is on, the caller number or called number of a call routed by the route will be

manipulated according to the configured manipulation rule; The parameter is off by

default. For manipulation rule, please make reference to 3.4.8

SIP

Header

Passthrough

If it is on, the SIP header of a call routed by the route will be manipulated according to

the configured manipulation rule; The parameter is off by default. For manipulation rule,

please make reference to 3.4.10

Note:

Caller number or called number can also be manipulated when a call comes into an access network, access SIP

trunk or core SIP trunk. In this section, number is manipulated after a call has finished choosing a route.

Summary of Contents for SBC1000







































































Search results

Summary of Contents for SBC1000

Reviews:

Brands by name

Popular brands

Dinstar SBC1000, User Manual

Search results

Summary of Contents for SBC1000

Reviews:

Brands by name

Popular brands