DWG2000C-4/8G User Manual
45
/
51
Table 4-14-1 Management Parameter
Voice Prompt Language
Select the language of voice prompt. There are two kind of voice : English
and Chinese
Syslog Paremeter
Syslog is a standard for network device data logging. It allows separation
of the software that generates messages from the system that stores them
and the software that reports and analyzes them. It also provides devices
which would otherwise be unable to communicate a means to notify
administrators of problems or performance. There are 5 grades of syslog,
Including NONE, DEBUG, NOTICE, WARNING and ERROR.
Send CDR
Telephone exchanges generate so called Call Detail Records (CDRs)
which contain detailed information about calls originating from, terminating
at or passing through the exchange. Not surprisingly CDRs are used for
billing.
Set to Yes gateway will sne the CDR to the syslog server.
NTP Parameter
The Network Time Protocol (NTP) is a protocol and software
implementation for synchronizing the clocks of computer systems over
packet-switched, variable-latency data networks.
User need to fill the NTP Server Address and select Time Zone
4.14.3 Config Backup
Figure 4-14-3 Config backup
Click 'Backup' for download configuration file to your computer.
4.14.4 Data Restore
Figure 4-14-4 Data restore
Send data file from your computer to the device
www.InternetVoipPhone.co.uk | [email protected] | 0800 088 4846