DWG2000C-4/8G User Manual
42
/
51
Table 4-12-3 Description of Port Configuration
Port Configuration
U
sed to configure ports’ gain, Auto-Dial, etc.
ALL ports register used
same user ID
The default is not. If set to "yes" ,all the port will use user ID
SIP User ID
It is the account used for registration, equipment port's unique identifier
Authenticate ID
Used for authenticate
Password
Its register Password
Tx Gain
Its DSP’s Tx Gain. Adjusting it will effect volume on GSM side.
Rx Gain
Its DSP’s Tx Gain. Adjusting it will effect volume on IP side.
To VoIP Hotline
When PSTN part client calls to this port, gateway will auto forward to the
hotline User ID.
Leave it blank if you don’t need this function. *Note: Please
config Tel->IP Operation if you need this function.
To PSTN Hotline
When VoIP part client calls to this port, Gateway will auto forward to the
number to PSTN part.
Leave it blank if you don’t need this function.
*Note: Please config IP->Tel Operation if you need this function.
Auto-Dial Delay Time
The auto-dial delay time of hotline , the range is 0-10 seconds
4.13 Digit Map
Figure 4-13-1 Digit map
www.InternetVoipPhone.co.uk | [email protected] | 0800 088 4846