DWG2000C-4/8G User Manual
26
/
51
Table 4-7-2 Description of IP to Tel Routing
4.7.3 Tel->IP Routing
Figure 4-7-3 Tel to IP Routing
IP ->Tel Routing
This item uses to configure outgoing call routes which can be used for recieve the calls
from the GSM
Index
It uniquely identifies a route. Its value is assigned globally, ranging from 0 to 31.
The route preferentially match the rules which the value of index is smaller
Description
It describes the route for the ease of identification. Its value is character string
Source IP
It specifies the IP of the caller
Source Prefix
All the caller number must match the source prefix. It specifies the source prefix allow to
send call out
Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
0xxxx: consist of some digits such as 015,08,09
1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Destination Prefix
All the called number must match the destination prefix, the call prefix indicates the
connected number
Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
0xxxx: consist of some digits such as 015,08,09
1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Destination
Its specifies destination Port or Port Group
www.InternetVoipPhone.co.uk | [email protected] | 0800 088 4846