Page 5
PHONE (RJ-11)
FXS port to be connected to analog phones / fax machines.
FXO
FXO ports to be connected to physical PSTN lines from a traditional
PSTN PBX or PSTN Central Office.
T
ABLE
2: D
EFINITIONS OF THE
DAG LEDS
Power LED
Indicates Power. Remains ON when Power is connected.
WAN LED
Indicates LAN (or WAN) port activity.
LAN LED
Indicates PC (or LAN) port activity.
FXS LED
Indicate status of the respective FXS Ports on the back
panel
Busy
– ON (Solid Green)
Available
– OFF
FXO LED
Indicate status of the respective FXO Ports-PHONE0 to PHONE7 on the back
panel
Busy
– ON (Solid yellow)
Available
– OFF
Run LED
Slow blinking When stand not registered.
Quick blinking When stand registered.
CONFIGURE YOUR DAG serial
The
DAG serial is
easy to configure using the embedded GUI pages and the following five (5) steps.
F
IVE EASY STEPS TO CONFIGURE THE DAG serial
1. Connect a standard touch-tone analog telephone (or fax machine) to first FXS port.
2. Connect another standard touch-tone analog telephone (or fax machine) to second FXS port.
3. Insert the Ethernet cable into the WAN port of DAG serial and connect the other end of the Ethernet
cable to an uplink port (a router or a modem, etc.)
4. Connect a PC to the LAN port of
DAG serial .
5. Insert the power adapter into the
DAG serial and
connect it to a wall outlet.
Ex:DAG serial