Page 15
2. Set
Work Mode to Route Mode, restart
DAG serial.
3
. Enable the “Remote Manage”.
4. Find the WAN IP address of the
DAG serial
.example:172.16.0.177
5. Access the
DAG serial
Web Configuration page by the following URI via WAN port:
http://
172.16.0.177
IMPORTANT SETTINGS
You must configure the following settings according to the local environment.
NOTE:
Most settings on the web configuration pages are set to the default values.
CONFIGURE SIP
SIP server settings are in System Parameter->SIP Config pages, and SIP user & password setting are in
System Parameter->Port Config, you must configure:
SIP server address,
SIP server port,
SIP user ID,
Authenticate ID,
Authenticate Password,
If you need outbound proxy, input:
Outbound proxy address,
Outbound proxy port
DTMF METHODS
DTMF Settings are in System Parameter->Service Config pages.
•
DTMF INBAND
•
DTMF RFC2833
•
DTMF SIGNAL
Enable DTMF method based on your PBX system.
PREFERRED VOCODER (CODEC)
The
DAG serial supports
a broad range of voice codecs. Under System Parameter->Service Config
web pages, choose your preferred order of different codecs:
•
PCMU
•
PCMA
•
G729 AB
•
G723
CONFIGURE THE DAG serial USING THE WEB BROWSER
The web page configuration includes 1) system info, 2) Network Parameter, 3) System
Parameter, 4) Tools.