Page 29
No answer call
forwarding
Call will transfer appointed phone when nobody answer the call.
call waiting
Default is No. User can use * code to use this feature per call basis.
call waiting tone
indicates an incoming call
，
default is 2 short beeps.
DND
When enabled all incoming calls are rejected.
Fax Config
FIGURE 22:Fax Config
Table 13 Fax Config
Fax mode
T.38 (Auto Detect) FoIP by default, or Pass-Through
Fax tone detection mode
Default is Callee. This decides whether Caller or Callee sends out the
re-INVITE for T.38 or Fax Pass Through.
ECM
Error Correction Mode
Fax rate
The
DAG serial
support most 14400bps least 2400bps fax rate. The default
value is 14400bps.
TOOLS
Tools includes 1) Software Update 2) Login Password 3) Remote Manage 4) Factory Reset 5) Restart.
FIGURE 23:Tools
Software Update
Software upgrade can be done via TFTP. The corresponding configuration settings are in the Software
update configuration page.
NOTES:
•
If the version is incompatible , the load will fail.