Page 31
Remote Manage
In route mode, if you want to access your DAG serial through WAN port, you need to enable remote
Management.
Note
：
•
This option will be displayed only in route mode.
•
This function can be enabled only by into the web interface through the LAN port.
FIGURE 26:Remote Manage
Factory Reset
WARNING!
Reset the Factory Default Setting will DELETE all configuration information of the device.
Please BACKUP or PRINT out all the settings before you approach to following steps. We will not take
any responsibility if you lose all the parameters of setting and cannot connect to your VoIP service
provider.
FIGURE 27:Factory Reset
Restart
When modified, many settings can be effective only after restart, which have prompts in the bottom of the
setting page.
Remotely restart the
DAG serial by
clicking the “Restart” button at the bottom of the configuration page.
When finished, re-login to the
DAG serial after
waiting for about 30 seconds.
FIGURE 28:Restart
SAVING THE CONFIGURATION CHANGES
Click the “Save” button in the Configuration page to save the changes to the
DAG serial
configuration.