Dinolift Dino 95T, Operating Instructions Manual

Page: 56 / 88

DINO 95T
56
19.3 MONTHLY INSPECTION (MAINTENANCE INSPECTION)
The inspection shall be performed by a person who is well familiar with the lift. Task list for
inspection:
–
perform the measures of the daily inspection
–
check the attachment points of the boom and the platform
–
check the operation and condition of the platform levelling system
–
perform visual inspection of the load-bearing structures
– chassis
– turning device
– telescope (fully extended)
– support outriggers and their joints
– welded seams for cracks, corrosion or breaches
– are the possible repair weldings duly executed
–
check that the platform does not "drift" (refer to the service instructions)
–
check that the outriggers do not "drift" (refer to the service instructions).
–
hydraulic oil level
–
check the electro-hydraulic rotating adaptor for leaks and seizures
–
check the tyres and the tyre pressure
–
check the wheel bolts and rims
–
check the turning gear play
–
check the operation of the driving device
–
check the condition and attachment of the electric wires
–
check the condition of the overrun
–
make sure that all signs, warnings and pictorials for operating controls and control equipment
are in place, in good condition and clean.
–
check that the lift is clean all over