DINO 95T
30
12 EMERGENCY DESCENT SYSTEM
Operation:
1. Retracting the telescope
Open the emergency descent valve for the telescope by turning the lever 27
clockwise and retract the telescope completely by pumping with hand
pump 28. The crank for the hand pump is located at the side of the chassis
control panel (see adjacent picture).
2. Lowering the boom
Open the emergency descent valve for the boom by turning the lever 27
counter-clockwise and lower the boom by pumping with hand pump 28.
3. Close the emergency descent valve by turning the lever 27 to its centre
position
4. The boom can be turned by placing a crank on the worm gear shaft in
the opening in the plastic cover of the turning device. The crank for the
hand pump is located at the side of the chassis control panel (see adjacent
picture).
NOTE!
Start by retracting the telescope completely, continue by lowering the
boom and finally turn the boom system.
Summary of Contents for Dino 95T
