56
Maintenance instructions
•
DINO 260XTD
Control centre (UCB), relays
K14
Turning the platform to the left. The linear motor is controlled by means of a relay;
the inductive limit switch RK9 limits the maximum turning angle by disconnecting the
control voltage from the relay.
K15
Turning the platform to the right. The linear motor is controlled by means of a relay;
the inductive limit switch RK10 limits the maximum turning angle by disconnecting
the control voltage from the relay.
Control centre (UCB), switches
JSL
Joystick, left:
telescope out-in
articulated arms up-down
rocker switch for automatic levelling and lifting of the outriggers
JSR
Joystick, right:
boom up-down
turning to the right-left
transferring the chassis to the front-rear and turning
pressing the rollers against the tyres using the left-hand rocker switch
S5
Start and stop switch for the combustion engine. Operates only, if the mains current
is not connected.
S4
Locking emergency stop switch. Stops all other functions except the emergency
descent and the sound signal, which remain operational. Controls the safety relay
SR4.
S7
Pedal; must be always activated before executing any control movements from the
platform.
S12
Start switch for the emergency descent, yellow pushbutton.
S13
Turning the platform to the left and right; controls the relays K14 and K15.
S32
Blue control button for the “telescope in” valve.
To be used, if the outreach limit RK5 has been exceeded.
Also the pedal S7 must be depressed.
S33
Lifting and lowering the support outrigger 1, lever switch.
S34
Lifting and lowering the support outrigger 2, lever switch.
S35
Lifting and lowering the support outrigger 3, lever switch.
S36
Lifting and lowering the support outrigger 4, lever switch.
S37
Levelling the platform manually to the front and rear, lever switch.
