41
4.3.20.
Check the lights
Check the condition of the lights and the reflectors. Replace any burned-out bulbs or lights,
and damaged reflectors.
4.3.21.
Inspect thoroughly the driving device
Check the condition of the driving device, the attachment of its parts and the condition of the
covers for the electric components.
Check that the valves of the driving device operate properly and no movement occurs when
the spool in the neutral position.
4.3.22.
Lubricate the slide and threads of the jockey wheel
Lubricating the slide and threads of the jockey wheel
Reference number of the point in the lubrication plan: 10.
4.3.23.
Change the hydraulic oil and the filter
DANGER
WARNING
CAUTION
NOTICE
Protect your skin against exposure to hydraulic oil. Used oil can be harmful to the skin.
Changing the hydraulic oil and the filter:
1. remove the plug and drain the oil tank with the lift's all
cylinders fully retracted
2. clean and rinse the oil tank with suitable agent
3.
replace the pressure and return filters
4. install the drain plug
5.
refill the tank with fresh oil Volume of hydaulic oil
required for oil change is about 20 litres
• see the outside of the oil reservoir for data about the
oil filled at the factory
• The viscosity class of the hydraulic oil must be ISO
VG15-32, and the oil must meet the requirements
according to DIN 51524- HLP.
6. if necessary, top up hydraulic oil to the level with the
upper edge of the level eye, while the lift is in the
transport position.
OILY WASTE
DANGER
WARNING
CAUTION
NOTICE
Do not mix different oils types.
4.3.24. Inspect the anti-corrosion treatment
Repeat the anti-corrosion treatment using e.g. Tectyl 210R anti-corrosion agent
