32
Maintenance instructions
•
DINO 260XTD
4.3.4.
Inspect thoroughly the hydraulic hoses, pipes and connections
•
check the hoses for any leaks or chafing
•
check that the pipes do not show any dents, leaks, trace of corrosion or chafing at the
clamps
• check that all the pipes are properly fastened
• check the hose and pipe connections for leaks, and that the connections are properly
tightened
Replace any externally damages hoses or buckled pipes.
4.3.5.
Inspect the axle and the suspension
• check the attachment of the axle
• check the condition of the rubber absorbers and the torsion arms
4.3.6.
Check thoroughly the condition of the brakes
1. remove the wheels
2. clean the brake system and check the settings
3. check that the brake shoes can move, and that their springs properly return them
4. replace any worn out linings
5. put the wheels in place and tighten the wheel bolts
6. Remember to re-check the tightness of the wheel bolts after a drive of about 100 km.
7. check the free movement of the overrun brake and the parking brake
8. check the attachment and condition of the brake rods
9. check the safety wires
4.3.7.
Check electro-hydraulic rotary adaptor
Lift the articulated arms up so that you can remove the covers of the turning device.
Check the electro-hydraulic rotary adaptor for oil leaks. Check that the lever arm does not
seize.
Put the covers back in place after the inspection.
