26
Maintenance instructions
•
DINO 260XTD
4.2.5.
Lubricate the tow hitch and the overrun
Reference number of the point in the lubrication plan: 13.
If necessary, apply a thin grease film on moving parts of the ball coupling.
4.2.6.
Check the condition of the brakes
The following service measures must be carried out every six months or after driving
13,000–15,000 km:
• check the brake linings for wear
• check the operation of the overrun brake (by means of a test run – execute a few test
brakings)
• lubricate the sliding part of the overrun brake
The
wheel bearings
are lubricated for life and do not require any servicing.
(The bearings do not need any additional lubrication, and they neither need nor can be re-
adjusted.)
Turn the wheels at least once every 3 months to keep the lubricating film intact.
DANGER
WARNING
CAUTION
NOTICE
The service-life of the double row angular contact compact bearings is long and they
are maintenance-free. Therefore, the bearings very rarely break under normal operating
conditions. Should a bearing failure occur, due to exceptional operating conditions, replace
the entire brake drum assembly with the pressed-in bearings and the locking nut.
Assign the above work to a specialised workshop.