Dini Argeo DGT100, User Manual

Page: 52 / 64

52
Optimized layout for A4 print.
i
USER_MAN_ENG_DGT100_V8
Serial commands
WEIGHT READING (standard string)
READING OF THE EXTENDED OR MULTI-SCALE WEIGHT (if
TYPE
=
TRANSM
)
WEIGHT READING IN HIGH RESOLUTION (X10) AUTOMATIC TARE
By selecting the PC port on demand mode (
onde
), you can communicate with the indicator via serial commands.
For each command received, the indicator emits a string containing the response (refer to the command description) or one of the
following signals:
OK
<CRLF> Command sent when sending a correct command. This response does not imply that the command is executed.
ERR01
<CRLF> Command sent correctly but followed by letters entered unintentionally (e.g. READF, TARES).
ERR02
<CRLF> Incorrect command data.
ERR03
<CRLF> Command sent not allowed (indicator busy, or not used in the selected operating mode).
ERR04
<CRLF> Command sent non-existent.
If the 485 protocol has been selected, you must precede the command with the indicator address (e.g. 01READ).
Format
R E A D Format
R E X T
Format
G R 1 0
Format T A R E
Response
Standard string.
Response Extended string.
Response Standard string with weight in resolution x10.
Response OK (or ERRxx).
MANUAL TARE
Format T M A N t t t t t t
Where
tttttt tare value
Response OK (or ERRxx).
ZEROING (of active channel)
Format Z E R O
Response OK (or ERRxx).
DISABLING KEYPAD ENABLING KEYPAD
Format
K E Y E D
Format K E Y E E
Response OK (or ERRxx).
Response
OK (or ERRxx).
READING INPUTS READING OUTPUTS
Format
I N P U n
Where n Input (1 / 2).
Format
O U T S n
Where n Output (1 / 2).
Response I N P U n v v v v
Where
n Input number.
vvvv
Input status:
0000 = Not active.
0001 = Active.
FFFF = Input reading error.
Response O U T S n v v v v
Where
n Output number.
vvvv
Output status:
0000 = Not active.
0001 = Active.
FFFF = Output reading error.
By entering a manual tare value of 0, the tare on the
scale is cleared.