OPERATOR
’S MANUAL
with Maintenance Information
Function Tests
26
51 Press the lift function select button. The
indicator light should turn on. Press and
hold the function enable switch on the
control handle.
Raise the platform.
⊙
Result: Raise the platform approximately
3.5 m from the ground and stopped rising.
The alarm should sound
52 Press the drive function select button.
53 Press and hold the function enable switch.
Slowly move the control handle in the
direction indicated by the arrow.
⊙
Result: The drive function should not work
in either direction.
54 Press and hold the function enable switch
on the proportional control handle.
Depress the thumb rocker switch in the
direction identified by the yellow triangle
on the control panel.
⊙
Result: The rear wheels should turn in the
direction that the blue triangle points on the
control panel. Until the steering angle is
less than 30 degrees
55 Press and hold the function enable switch.
Slowly move the control handle in the
direction indicated by the arrow.
⊙
Result: The drive function should work
properly.
56 Press the lift function select button. The
indicator light should turn on. Press and
hold the function enable switch on the
control handle.
Raise the platform.
⊙
Result: The platform should rise.
57 Press and hold the function enable switch
on the proportional control handle.
Depress the thumb rocker switch in the
direction identified by the yellow triangle
on the control panel.
⊙
Result: The rear wheels should turn in the
direction that the blue triangle points on the
control panel. Until the steering angle is
less than 30 degrees
58 Lower the platform to the stowed position
59 Press and hold the function enable switch
on the proportional control handle.
Depress the thumb rocker switch on top of
the proportional control handle in the
direction identified by the yellow triangle
on the control panel. Until the steering
angle is greater than 30 degrees.
60 Press the lift function select button. The
indicator light should turn on. Press and
hold the function enable switch on the
control handle.
Raise the platform.
⊙
Result: Raise the platform approximately
3.5 m from the ground and stopped rising.
The alarm should sound
61 Press the drive function select button.
62 Press and hold the function enable switch.
Slowly move the control handle in the
direction indicated by the arrow.
⊙
Result: The drive function should not work
in either direction.
63 Press and hold the function enable switch
on the proportional control handle.
Depress the thumb rocker switch in the
direction identified by the blue triangle on
the control panel.
⊙
Result: The rear wheels should turn in the
direction that the yellow triangle points on
the control panel. Until the steering angle is
less than 30 degrees
64 Press and hold the function enable switch.
Slowly move the control handle in the
direction indicated by the arrow.
⊙
Result: The drive function should work
properly.
65 Press the lift function select button. The
indicator light should turn on. Press and
Summary of Contents for JCPT2212DC
Page 3: ......
Page 5: ......
Page 17: ...OPERATOR S MANUAL with Maintenance Information Decals 12 ...
Page 18: ...OPERATOR S MANUAL with Maintenance Information Decals 13 ...
