DinLOG – User Manual
Page | 6
Rev 1.6
2.2. System components
Main component of the
DiNLOG
EMS system is logger device which is the system brain and monitors all
the other components.
LogBase 04
has integrated pressure sensor, inputs for the temperature sensor probe and single I/O pin
which can be used as frequency input (engine speed/rpm) or alarm output. It also has a CAN bus
interface which is used to connect NOx sensor and OnRoad Panelbox or
DiNLOG
Terminal software.
Figure 2.1.
DiNLOG
-
LogBase 04
OnRoad Panelbox
is the user’s communication interface that is used to communicate with the logger unit.
Panelbox displays the online data, alarms the user, shows the system errors, and can be used to
parametrize the system. It has 6 function keys and buzzer / light notification.
Figure 2.2.
OnRoad Panelbox
Pressure sensor connection kit (optional)
has all the necessary components to connect the pressure
sensor with a filter. It is consisted of a stainless-steel pipe, ¼ NPT fitting, high temperature hose and
moisture separator (optional).
Figure 2.3.
Pressure sensor connection kit
Temperature sensor connection kit
has all the necessary components to connect the temperature sensor
with a filter. It is consisted of a ¼ NPT fitting and the temperature sensor itself is a part of the pre-connected
cable harness.
