background image

20

Boost Settings

Default Boost Target Temperature

This is the default Boost Target Temperature that is used when ‘Boost Mode’ is activated. 

Max. Boost Duration

This is the maximum length of time that the user is able to activate ‘Boost’ for.

Shown in minutes (when under an hour) or hours (if over an hour) in the following increments: 30 min, 1 hour, 2 

hours, 3 hours, 4 hours.

The value chosen will be the max allowed when boost is activated.

Setback Settings

Setback

 is a function that only modifi es Timer Mode operation. When Setback is enabled it overrides any 

Heating 

Off 

 period to maintain a constant temperature.

This can be used to prevent the room temperature from falling below a minimum value while there is no demand 

for heat (

Heating On

).

The value of this temperature is restricted to a value between 7 and 18 °C. This is because Setback should not be 

treated as a regular 

Heating On

 period.

Date & Time Settings

This allows the Time, Date and Daylight Savings Time settings to be modifi ed.

Sound

Audio feedback when the user presses a button can be enabled or disabled here.

‘Comms’ (Communications)

This allows Wireless Connectivity features to be enabled or disabled.

Entering this menu item will display a list of available communications methods

to that heater.

Adaptive

Open Window Detection

This is a global setting that can interrupt any active mode. Activating this setting enables 

Open Window Detection

 

to switch the Heater to a 

Heating Off 

 state if it detects an open window in the room it’s operating in.

NOTE:

In environments where the product may read sudden decreases in temperature, this feature may 
activate in error. This can occur in drafty or poorly insulated environments as well as if the heater is 
undersized for the room. This feature should be disabled using the instructions above if activating for 
reasons other than the intended purpose. If you think that your environment is not as described here 
and this feature is activating, please contact our customer care team with the details on the rear page 
of this document.

Summary of Contents for Q-Rad QRAD050E

































Reviews: