background image

1

IMPORTANT

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR 
FUTURE REFERENCE. 

Note also the information presented on the appliance

IMPORTANT SAFETY ADVICE

When using electrical appliances, basic precautions should always be followed to reduce 
the risk of fire, electrical shock, and injury to persons, including the following:

IMPORTANT:

 The wall bracket supplied with the appliance must be used.

WARNING: DO NOT USE THIS HEATER IN THE IMMEDIATE SURROUNDINGS OF A 

BATH, A SHOWER OR A SWIMMING POOL.

IMPORTANT:

 If the heater is installed in a room containing a bath or shower, it must

be installed so that switches and other controls cannot be touched by a person using
a bath or shower.

Do not use outdoors.
Do not locate the heater immediately below a fixed socket outlet or connection box.

WARNING:

 In order to avoid overheating, do not cover the heater. Do not place material 

or garments on the heater, or obstruct the air circulation around the heater, for instance 
by curtains or furniture, as this could cause overheating and a fire risk.

NEVER

 cover or obstruct in any way the heat outlet slots at the top of the heater or 

the air inlet slots in the base of the heater.

The heater carries a warning ‘

DO NOT COVER

’ to alert the user to the risk of fire that 

exists if the heater is accidentally covered.

CAUTION:

 Some parts of this product can become very hot and cause burns. Particular 

attention has to be given where children and vulnerable people are present.

This appliance can be used by children aged from 8 years and above and by persons with 
reduced physical, sensory or mental capabilities or lack of experience and knowledge 
if they have been given supervision or instruction concerning use of the appliance in 
a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be 
made by children without supervision.

Children of less than 3 years should be kept away unless continuously supervised. 
Children aged from 3 years and less than 8 years shall only switch on/off the appliance 
provided that it has been placed or installed in its intended normal operating position 
and they have been given supervision or instruction concerning use of the appliance 
in a safe way and understand the hazards involved. Children aged from 3 years and 
less than 8 years shall not plug in, regulate and clean the appliance or perform user 
maintenance.

Summary of Contents for PLX050E

































Reviews: